Panasonic 42

Panasonic 42" TC-P42C2 TX-P42C2B TNPA5072AC X-Main XSUS X-Sustain Board Unit

Panasonic 42

Panasonic 42" TC-P42C2 TNPA5066AD Plasma SN Board Unit Motherboard

Panasonic 42" TC-P42C2 TNPH0831AT Plasma Main Video Board Unit Motherboard

Availability: Out of stock
SKU
TNPH0831AT
$94.96
Request an email notification when this item comes back in stock
Please be sure that the BOARD Part Number and picture on your motherboard is EXACTLY as shown above. Do not match by TV Model. There are possibly several different boards for each model TV. This board has been pulled from a working cracked screen TV. All items are tested and guaranteed to work. This photo is STOCK meaning it may vary slightly from the one you received in color or removable cables.

Part Type:: Main Unit , Main Board , VGA Input , HDMI Input , A/V Board , Tuner Board
Part Number:: TXN/A1LFUUS
Part Usage:: Plasma
MFR Part Number 1:: Panasonic TXN/A1LFUUS
Board Number(s):: TNPH0831AT
Known Models:: PANASONIC TC-P42C2
Panel Sticker Number:: MC106H30U13

TNPH0831 is pritned directly on the board and the last two letters are determined by a key with resistors near the tuner. You have to look at where the resistors are on the grid and match it to the find the letters on top of the grid. Contact us if you need help decoding this.

Part Type:  Main Unit
Main Board
VGA Input
HDMI Input
A/V Board
Tuner Board
Part Number:  TXN/A1LFUUS
Part Usage:  Plasma
MFR Part Number 1:  Panasonic TXN/A1LFUUS
Board Number(s):  TNPH0831AT
Known Models:  PANASONIC TC-P42C2
Panel Sticker Number:  MC106H30U13

No Related Posts

    NO Power Troubleshooting HELP

    We are here to help! If you're unsure of how to diagnose and troubleshoot the TV message or call us for more assistance!

    *NOTE* LG & Vizio TVs must be plugged in for 5 minutes before it will turn on*

    *For main board replacements check firmware upgrades online - We can not pre-install them*

    1. Inspect ALL Ribbons and connectors. Any tears or bad connections between boards must be replaced FIRST

    2. If you have any of these boards, it should be the first board to be replaced
    A) T-Con Board - Video Problems (No Video with standby light on, audio but no video, grainy, distorted, or color problems in screen)
    B) X or Y Buffer Board (Plasma TVs only) - Standby light is on but no power
    C) Backlight Inverter / LED Driver - No Video with standby light on

    3. Main Video Board
    - Standby light is on but no power
    - Either video or audio does not work (if no T-Con in TV. If audio but no video it is T-Con)

    4. Power Board - No power AND standby light does NOT turn on. If standby light is on try other boards above

    5. Panel - No power, distorted picture, lines, slow motion, half screen, faded in / out. Panel problems are usually not worth replacing the panel.

    Check out Tampatec's video below for help with general troubleshooting and diagnosing problems with boards

    Submit Offer
    Price too high? Submit your best offer now! We respond in under 24 hours!
    Email
    Your Price
    qty
    Submit