Coronavirus Update: We will stay open to ship all packages as normal for the time being. We are located in California and Indianapolis so we will be shipping, accepting returns, and answering emails as long as we are not forced otherwise. Please give extra time for any delays the shipping companies may experience.Note: We will not be answering phone calls but will attend to all emails within 24 hours. Email: website@electropartsonline.comPhone: (310)971-9249

Samsung 42

Samsung 42" 42HP83 LJ92-00993A Upper Y Scan Drive Board Unit

Samsung 40

Samsung 40" UN40EH6030FXZA BN95-00693A LED/LCD T-Con Timing Board Unit

Samsung 42" GM-V42UG LJ92-00813A G-Buffer Board Unit

Availability: In stock
SKU
LJ92-00813A
$13.98
Price too high? Submit your best offer now! We respond in under 24 hours!
Submit Offer
  • no restockingNo Restocking Fees
  • ship-bothwaysWe pay shipping both ways for all domestic board returns (stands excluded)
  • warrantyStandard 180 day warranty
  • free shippingFree shipping on all boards within contiguous U.S. with optional expedited and worldwide shipping
  • ebayeBay Top Rated Seller with 66,000+ feedback at 99.4% positive rating
  • We offer free professional tech support
Request an email notification when this item comes back in stock
Please be sure that the BOARD Part Number and picture on your motherboard is EXACTLY as shown above. Do not match by TV Model. There are possibly several different boards for each model TV. This board has been pulled from a working cracked screen TV. All items are tested and guaranteed to work. This photo is STOCK meaning it may vary slightly from the one you received in color or removable cables.

Part Type: 42 SD S3.1 TCP G-Buffer
Part Number: BN96-01215A
Known Models: Dell , W4200ED , Samsung , PPM42S3QS/XAA 0001 , SPP4231KX/XAA , SPP4231X/XAA , SPP4251AS/XAA , SPP4251AX/XAA , SPP4251S/XAA , Sylvania , 6842PEA , SRPD442 , Polaroid , PLA-4205 , Planar , PD42ED , Maxent , MX-42VM11 P4202YD05 , Esa , PDP4294LV1 , Ilo , P42BSKH-US2 , Jvc , GM-V42UG , PD-42V475 , PD-42V485 , VM-42WV74 , Magnavox , 42MF130A/37 , 42MF7010/17 , Techview , PTSW4200

Part Type 42 SD S3.1 TCP G-Buffer
Part Number BN96-01215A
Known Models Dell
W4200ED
Samsung
PPM42S3QS/XAA 0001
SPP4231KX/XAA
SPP4231X/XAA
SPP4251AS/XAA
SPP4251AX/XAA
SPP4251S/XAA
Sylvania
6842PEA
SRPD442
Polaroid
PLA-4205
Planar
PD42ED
Maxent
MX-42VM11 P4202YD05
Esa
PDP4294LV1
Ilo
P42BSKH-US2
Jvc
GM-V42UG
PD-42V475
PD-42V485
VM-42WV74
Magnavox
42MF130A/37
42MF7010/17
Techview
PTSW4200


The board has been pulled from working cracked screen TV. All items are tested and guaranteed to work.


Please be sure that the Part Number and picture on your motherboard is EXACTLY as shown above. There are possibly several different boards for each model TV. There will be a 15% restocking fee for any incorrect purchases.

Power Issues Troubleshooting

*NOTE* LG & Vizio TVs must be plugged in for 5 minutes before it will turn on*

1. Inspect ALL Ribbons and connectors. Any tears or bad connections between boards must be replaced FIRST

2. If you have any of these boards, it should be the first board to be replaced
A) T-Con Board - Video Problems (No Video with standby light on, audio but no video, grainy, distorted, or color problems in screen)
B) X or Y Buffer Board (Plasma TVs only) - Standby light is on but no power
C) Backlight Inverter / LED Driver - No Video with standby light on

3. Main Video Board
- Standby light is on but no power
- Either video or audio does not work (if no T-Con in TV. If audio but no video it is T-Con)

4. Power Board - No power AND standby light does NOT turn on. If standby light is on try other boards above

5. Panel - No power, distorted picture, lines, slow motion, half screen, faded in / out. Panel problems are usually not worth replacing the panel.

No Related Posts

    NO Power Troubleshooting HELP

    We are here to help! If you're unsure of how to diagnose and troubleshoot the TV message or call us for more assistance!

    *NOTE* LG & Vizio TVs must be plugged in for 5 minutes before it will turn on*

    *For main board replacements check firmware upgrades online - We can not pre-install them*

    1. Inspect ALL Ribbons and connectors. Any tears or bad connections between boards must be replaced FIRST

    2. If you have any of these boards, it should be the first board to be replaced
    A) T-Con Board - Video Problems (No Video with standby light on, audio but no video, grainy, distorted, or color problems in screen)
    B) X or Y Buffer Board (Plasma TVs only) - Standby light is on but no power
    C) Backlight Inverter / LED Driver - No Video with standby light on

    3. Main Video Board
    - Standby light is on but no power
    - Either video or audio does not work (if no T-Con in TV. If audio but no video it is T-Con)

    4. Power Board - No power AND standby light does NOT turn on. If standby light is on try other boards above

    5. Panel - No power, distorted picture, lines, slow motion, half screen, faded in / out. Panel problems are usually not worth replacing the panel.

    Check out Tampatec's video below for help with general troubleshooting and diagnosing problems with boards

    Submit Offer
    Price too high? Submit your best offer now! We respond in under 24 hours!
    You will be forwarded to the checkout page to complete the offer.

    If offer is accepted: your payment will automatically go through and we will ship the next business day after accepted

    If offer is denied: your card will not be charged and you will be notified. You can submit a follow up offer.
    Your Price
    qty
    Submit