Sharp 60

Sharp 60" LC-60E69U 1E2D0002 LCD Main Video Board Unit Motherboard

Sharp 60

Sharp 60" LC-60LE640U DUNTKF975FM08 DUNTKF975WE08 T-Con Control Timing Board

Sharp 22" LC-22SB28UT CA55I07011 LCD Main Video Board Unit Motherboard

Availability: Out of stock
SKU
CA55I07011
$21.92
Request an email notification when this item comes back in stock
Please be sure that the BOARD Part Number and picture on your motherboard is EXACTLY as shown above. Do not match by TV Model. There are possibly several different boards for each model TV. This board has been pulled from a working cracked screen TV. All items are tested and guaranteed to work. This photo is STOCK meaning it may vary slightly from the one you received in color or removable cables.

Part Type:: Main Unit , Main Board , VGA Input , HDMI Input , A/V Board , Tuner Board
Part Number:: 9JDA39Y01UF40
MFR Part Number 1:: Sharp 9JDA39Y01UF40
Board Number(s):: CA34I06212 , CA55I07011
Known Models:: SHARP LC-22SB28UT

Part Type:Main Unit
Main Board
VGA Input
HDMI Input
A/V Board
Tuner Board
Part Number:9JDA39Y01UF40
MFR Part Number 1:Sharp 9JDA39Y01UF40
Board Number(s):CA34I06212
CA55I07011
Known Models:SHARP LC-22SB28UT

This board has been pulled from a working cracked screen TV. All items are tested and guaranteed to work.

Please be sure that the Part Number and picture on your motherboard is EXACTLY as shown above. There are possibly several different boards for each model TV. There will be a 15% restocking fee for any incorrect purchases.

Power Issues Troubleshooting

*NOTE* LG & Vizio TVs must be plugged in for 5 minutes before it will turn on*

1. Inspect ALL Ribbons and connectors. Any tears or bad connections between boards must be replaced FIRST

2. If you have any of these boards, it should be the first board to be replaced
A) T-Con Board - Video Problems (No Video with standby light on, audio but no video, grainy, distorted, or color problems in screen)
B) X or Y Buffer Board (Plasma TVs only) - Standby light is on but no power
C) Backlight Inverter / LED Driver - No Video with standby light on

3. Main Video Board
- Standby light is on but no power
- Either video or audio does not work (if no T-Con in TV. If audio but no video it is T-Con)

4. Power Board - No power AND standby light does NOT turn on. If standby light is on try other boards above

5. Panel - No power, distorted picture, lines, slow motion, half screen, faded in / out. Panel problems are usually not worth replacing the panel.

No Related Posts

    NO Power Troubleshooting HELP

    We are here to help! If you're unsure of how to diagnose and troubleshoot the TV message or call us for more assistance!

    *NOTE* LG & Vizio TVs must be plugged in for 5 minutes before it will turn on*

    *For main board replacements check firmware upgrades online - We can not pre-install them*

    1. Inspect ALL Ribbons and connectors. Any tears or bad connections between boards must be replaced FIRST

    2. If you have any of these boards, it should be the first board to be replaced
    A) T-Con Board - Video Problems (No Video with standby light on, audio but no video, grainy, distorted, or color problems in screen)
    B) X or Y Buffer Board (Plasma TVs only) - Standby light is on but no power
    C) Backlight Inverter / LED Driver - No Video with standby light on

    3. Main Video Board
    - Standby light is on but no power
    - Either video or audio does not work (if no T-Con in TV. If audio but no video it is T-Con)

    4. Power Board - No power AND standby light does NOT turn on. If standby light is on try other boards above

    5. Panel - No power, distorted picture, lines, slow motion, half screen, faded in / out. Panel problems are usually not worth replacing the panel.

    Check out Tampatec's video below for help with general troubleshooting and diagnosing problems with boards

    Submit Offer
    Price too high? Submit your best offer now! We respond in under 24 hours!
    Email
    Your Price
    qty
    Submit