Sony 32

Sony 32" KDL-32BX310 KDL-32BX330 012-0001-8046 Base Stand Neck & Screws NEW!

Westinghouse 24

Westinghouse 24" EW24T7EW 1203H0216A LED LCD Main Video Board Unit Motherboard

Vizio 47" SV470XVT1A 0171-4072-0044 LCD Daughter Board Assy Unit Motherboard

Availability: Out of stock
SKU
17140720044
$21.92
Please be sure that the BOARD Part Number and picture on your motherboard is EXACTLY as shown above. Do not match by TV Model. There are possibly several different boards for each model TV. This board has been pulled from a working cracked screen TV. All items are tested and guaranteed to work. This photo is STOCK meaning it may vary slightly from the one you received in color or removable cables.

Part Type:: Daughter Board Assy , Pc Board
Part Number:: 3642-0012-0185
MFR Part Number 1:: Vizio 3642-0012-0185
Board Number(s):: 0171-4072-0044
Known Models:: VIZIO SV470XVT1A , VIZIO SV420XVT1A

Part Type:Daughter Board Assy
Pc Board
Part Number:3642-0012-0185
MFR Part Number 1:Vizio 3642-0012-0185
Board Number(s):0171-4072-0044
Known Models:VIZIO SV470XVT1A
VIZIO SV420XVT1A

NO Power Troubleshooting HELP

We are here to help! If you're unsure of how to diagnose and troubleshoot the TV message or call us for more assistance!

*NOTE* LG & Vizio TVs must be plugged in for 5 minutes before it will turn on*

*For main board replacements check firmware upgrades online - We can not pre-install them*

1. Inspect ALL Ribbons and connectors. Any tears or bad connections between boards must be replaced FIRST

2. If you have any of these boards, it should be the first board to be replaced
A) T-Con Board - Video Problems (No Video with standby light on, audio but no video, grainy, distorted, or color problems in screen)
B) X or Y Buffer Board (Plasma TVs only) - Standby light is on but no power
C) Backlight Inverter / LED Driver - No Video with standby light on

3. Main Video Board
- Standby light is on but no power
- Either video or audio does not work (if no T-Con in TV. If audio but no video it is T-Con)

4. Power Board - No power AND standby light does NOT turn on. If standby light is on try other boards above

5. Panel - No power, distorted picture, lines, slow motion, half screen, faded in / out. Panel problems are usually not worth replacing the panel.

Check out Tampatec's video below for help with general troubleshooting and diagnosing problems with boards

Submit Offer
Price too high? Submit your best offer now! We respond in under 24 hours!
Email
Your Price
qty
Submit