Samsung 37

Samsung 37" LN37B530 BN96-11605A LCD Main Video Board Unit Motherboard

Samsung 42

Samsung 42" PN42C450 BN96-12653A Plasma F Buffer Board Unit Motherboard

Emerson 42" PL-P42W-10A BN96-12171A Plasma Y-Buffer Board Unit Motherboard

Availability: Out of stock
SKU
BN9612171A
$24.93
Please be sure that the BOARD Part Number and picture on your motherboard is EXACTLY as shown above. Do not match by TV Model. There are possibly several different boards for each model TV. This board has been pulled from a working cracked screen TV. All items are tested and guaranteed to work. This photo is STOCK meaning it may vary slightly from the one you received in color or removable cables.

Part Type:: Y-Buffer Board (2 Layer)
Part Number:: BN96-12171A
REV Number:: 1.2
MFR Part Number 1:: Samsung BN96-12171A
Known Models:: EMERSON PL-P42W-10A , INSIGNIA NS-P42Q-10A , SAMSUNG PN42B450B1DXZA , SAMSUNG PN42B400P3DXZA , SAMSUNG PN42A410C1DXZA , SAMSUNG PN42A400C2DXZA , SAMSUNG PN42A450P1DXZA , SAMSUNG PN42B430P2DXZA
Panel Sticker Number:: S42AX-YB08

Part Type:Y-Buffer Board (2 Layer)
Part Number:BN96-12171A
REV Number:1.2
MFR Part Number 1:Samsung BN96-12171A
Known Models:EMERSON PL-P42W-10A
INSIGNIA NS-P42Q-10A
SAMSUNG PN42B450B1DXZA
SAMSUNG PN42B400P3DXZA
SAMSUNG PN42A410C1DXZA
SAMSUNG PN42A400C2DXZA
SAMSUNG PN42A450P1DXZA
SAMSUNG PN42B430P2DXZA
Panel Sticker Number:S42AX-YB08

NO Power Troubleshooting HELP

We are here to help! If you're unsure of how to diagnose and troubleshoot the TV message or call us for more assistance!

*NOTE* LG & Vizio TVs must be plugged in for 5 minutes before it will turn on*

*For main board replacements check firmware upgrades online - We can not pre-install them*

1. Inspect ALL Ribbons and connectors. Any tears or bad connections between boards must be replaced FIRST

2. If you have any of these boards, it should be the first board to be replaced
A) T-Con Board - Video Problems (No Video with standby light on, audio but no video, grainy, distorted, or color problems in screen)
B) X or Y Buffer Board (Plasma TVs only) - Standby light is on but no power
C) Backlight Inverter / LED Driver - No Video with standby light on

3. Main Video Board
- Standby light is on but no power
- Either video or audio does not work (if no T-Con in TV. If audio but no video it is T-Con)

4. Power Board - No power AND standby light does NOT turn on. If standby light is on try other boards above

5. Panel - No power, distorted picture, lines, slow motion, half screen, faded in / out. Panel problems are usually not worth replacing the panel.

Check out Tampatec's video below for help with general troubleshooting and diagnosing problems with boards

Submit Offer
Price too high? Submit your best offer now! We respond in under 24 hours!
Email
Your Price
qty
Submit