LG 37

LG 37" 37CS560-UE EBT62057005 Main Video Board Motherboard Discount


50PQ20-UA AUSRLHR 50PQ30-UA AUSBLHR EAY60713401 Power Supply Board Discount

PANASONIC 50" TC-P50U2 TNPH0831AJ Main Video Board Motherboard Unit Discount

Availability: Out of stock
Request an email notification when this item comes back in stock
Discounted for defect. READ DESCRIPTION. Photo is stock. Doesn't display defect. Please be sure that the BOARD Part Number and picture on your motherboard is EXACTLY as shown above. Do not match by TV Model. There are possibly several different boards for each model TV. This board has been pulled from a working cracked screen TV. All items are tested and guaranteed to work.

Part Type: Main Video Board Motherboard Unit
Part Number: TNPH0831AJ
Known Models: PANASONIC , TC-P50U2

IMPORTANT NOTE: This board is discounted because of a minor cosmetic defect that does NOT effect the performance. The board is still tested, fully functional and GUARANTEED TO WORK.

A minor defect can be one or more of the following:
- Chipped connector / plastic
- Minor rust
- Broken screw hole
- Scratch / crack in board 

The board pictured is a stock photo and does not display the minor issue described above.

TNPH0831 is pritned directly on the board and the last two letters are determined by a key with resistors near the tuner. You have to look at where the resistors are on the grid and match it to the find the letters on top of the grid. Contact us if you need help decoding this.

Part Type Main Video Board Motherboard Unit
Part Number TNPH0831AJ
Known Models PANASONIC

No Related Posts

    NO Power Troubleshooting HELP

    We are here to help! If you're unsure of how to diagnose and troubleshoot the TV message or call us for more assistance!

    *NOTE* LG & Vizio TVs must be plugged in for 5 minutes before it will turn on*

    *For main board replacements check firmware upgrades online - We can not pre-install them*

    1. Inspect ALL Ribbons and connectors. Any tears or bad connections between boards must be replaced FIRST

    2. If you have any of these boards, it should be the first board to be replaced
    A) T-Con Board - Video Problems (No Video with standby light on, audio but no video, grainy, distorted, or color problems in screen)
    B) X or Y Buffer Board (Plasma TVs only) - Standby light is on but no power
    C) Backlight Inverter / LED Driver - No Video with standby light on

    3. Main Video Board
    - Standby light is on but no power
    - Either video or audio does not work (if no T-Con in TV. If audio but no video it is T-Con)

    4. Power Board - No power AND standby light does NOT turn on. If standby light is on try other boards above

    5. Panel - No power, distorted picture, lines, slow motion, half screen, faded in / out. Panel problems are usually not worth replacing the panel.

    Check out Tampatec's video below for help with general troubleshooting and diagnosing problems with boards

    Submit Offer
    Price too high? Submit your best offer now! We respond in under 24 hours!
    Your Price