Vizio 42

Vizio 42" E420VA E422VA P34T0951 LCD TV Base Stand Neck & Screws NEW

Toshiba 40

Toshiba 40" 40RF350U PE0450A LCD Power Supply Board Unit Motherboard

Sony 23" KDL-23S2000 PCB2681 LCD Backlight Inverter Board Unit Motherboard

Availability: In stock
Price too high? Submit your best offer now! We respond in under 24 hours!
Submit Offer
  • no restockingNo Restocking Fees
  • ship-bothwaysWe pay shipping both ways for all domestic board returns (stands excluded)
  • warrantyStandard 180 day warranty
  • free shippingFree shipping on all boards with optional expedited and worldwide shipping
  • ebayeBay Top Rated Seller with 66,000+ feedback at 99.4% positive rating
  • We offer free professional tech support
Please be sure that the BOARD Part Number and picture on your motherboard is EXACTLY as shown above. Do not match by TV Model. There are possibly several different boards for each model TV. This board has been pulled from a working cracked screen TV. All items are tested and guaranteed to work. This photo is STOCK meaning it may vary slightly from the one you received in color or removable cables.

Part Type:: Back Light Inverter , Inverter Board
Part Number:: 1-789-511-12
MFR Part Number 1:: Sony 1-789-511-12
Board Number(s):: A06-126291PCB2681
Known Models:: SONY KDL-23S2000 , SONY KDL-23S2010
Panel Sticker Number:: LTY230W2-L02

Part Type:Back Light Inverter
Inverter Board
Part Number:1-789-511-12
MFR Part Number 1:Sony 1-789-511-12
Board Number(s):A06-126291PCB2681
Known Models:SONY KDL-23S2000
SONY KDL-23S2010
Panel Sticker Number:LTY230W2-L02

No Related Posts

    NO Power Troubleshooting HELP

    We are here to help! If you're unsure of how to diagnose and troubleshoot the TV message or call us for more assistance!

    *NOTE* LG & Vizio TVs must be plugged in for 5 minutes before it will turn on*

    *For main board replacements check firmware upgrades online - We can not pre-install them*

    1. Inspect ALL Ribbons and connectors. Any tears or bad connections between boards must be replaced FIRST

    2. If you have any of these boards, it should be the first board to be replaced
    A) T-Con Board - Video Problems (No Video with standby light on, audio but no video, grainy, distorted, or color problems in screen)
    B) X or Y Buffer Board (Plasma TVs only) - Standby light is on but no power
    C) Backlight Inverter / LED Driver - No Video with standby light on

    3. Main Video Board
    - Standby light is on but no power
    - Either video or audio does not work (if no T-Con in TV. If audio but no video it is T-Con)

    4. Power Board - No power AND standby light does NOT turn on. If standby light is on try other boards above

    5. Panel - No power, distorted picture, lines, slow motion, half screen, faded in / out. Panel problems are usually not worth replacing the panel.

    Check out Tampatec's video below for help with general troubleshooting and diagnosing problems with boards

    Submit Offer
    Price too high? Submit your best offer now! We respond in under 24 hours!
    Your Price