Samsung 75

Samsung 75" UN75F7100AFXZA BN94-07270B Main Video Board Motherboard Unit

bn9406739a_samsung_32_un32f6300afxza_bn94_06739a_main_video_board_motherboard_unit.jpg

Samsung 32" UN32F6300AFXZA BN94-06739A Main Video Board Motherboard Unit

Samsung 50" UN50H5500AFXZA BN94-07266T Main Video Board Motherboard Unit

Availability: Out of stock
SKU
BN9407266T
$53.93
Request an email notification when this item comes back in stock
Please be sure that the BOARD Part Number and picture on your motherboard is EXACTLY as shown above. Do not match by TV Model. There are possibly several different boards for each model TV. This board has been pulled from a working cracked screen TV. All items are tested and guaranteed to work. This photo is STOCK meaning it may vary slightly from the one you received in color or removable cables.

Part Type: Main Board Motherboard Unit
Part Number: BN94-07266T
Known Models: Samsung , UN50H5500AFXZA

Part Type Main Board Motherboard Unit
Part Number BN94-07266T
Known Models Samsung
UN50H5500AFXZA

No Related Posts

    NO Power Troubleshooting HELP

    We are here to help! If you're unsure of how to diagnose and troubleshoot the TV message or call us for more assistance!

    *NOTE* LG & Vizio TVs must be plugged in for 5 minutes before it will turn on*

    *For main board replacements check firmware upgrades online - We can not pre-install them*

    1. Inspect ALL Ribbons and connectors. Any tears or bad connections between boards must be replaced FIRST

    2. If you have any of these boards, it should be the first board to be replaced
    A) T-Con Board - Video Problems (No Video with standby light on, audio but no video, grainy, distorted, or color problems in screen)
    B) X or Y Buffer Board (Plasma TVs only) - Standby light is on but no power
    C) Backlight Inverter / LED Driver - No Video with standby light on

    3. Main Video Board
    - Standby light is on but no power
    - Either video or audio does not work (if no T-Con in TV. If audio but no video it is T-Con)

    4. Power Board - No power AND standby light does NOT turn on. If standby light is on try other boards above

    5. Panel - No power, distorted picture, lines, slow motion, half screen, faded in / out. Panel problems are usually not worth replacing the panel.

    Check out Tampatec's video below for help with general troubleshooting and diagnosing problems with boards

    Submit Offer
    Price too high? Submit your best offer now! We respond in under 24 hours!
    Email
    Your Price
    qty
    Submit