Philips 50

Philips 50" 50PFP5332D/37 S 50PTD LJ92-01490A Y Main Video Board Motherboard

lj92_01371c_maxent_50_mx50hpt51_pt_5045hd_lj92_01371c_main_logic_control_board_unit.jpg

Maxent 50" MX50HPT51 PT-5045HD LJ92-01371C Main Logic Control Board Unit

Samsung 58" FPT5884X/XAA FPT5894WX/XAA LJ92-01447A Y Scan Drive Upper Board Unit

Availability: Out of stock
SKU
LJ92-01447A
$38.92
Request an email notification when this item comes back in stock
Please be sure that the BOARD Part Number and picture on your motherboard is EXACTLY as shown above. Do not match by TV Model. There are possibly several different boards for each model TV. This board has been pulled from a working cracked screen TV. All items are tested and guaranteed to work. This photo is STOCK meaning it may vary slightly from the one you received in color or removable cables.

Part Type: Y Scan Drive Upper Board
Part Number: LJ92-01447A
Known Models: Samsung , FPT5884X/XAA , FPT5894WX/XAA , PN58A550S1FXZA , PN58A650T1FXZA , PN58A760T1FXZA

Part Type Y Scan Drive Upper Board
Part Number LJ92-01447A
Known Models Samsung
FPT5884X/XAA
FPT5894WX/XAA
PN58A550S1FXZA
PN58A650T1FXZA
PN58A760T1FXZA


No Related Posts

    NO Power Troubleshooting HELP

    We are here to help! If you're unsure of how to diagnose and troubleshoot the TV message or call us for more assistance!

    *NOTE* LG & Vizio TVs must be plugged in for 5 minutes before it will turn on*

    *For main board replacements check firmware upgrades online - We can not pre-install them*

    1. Inspect ALL Ribbons and connectors. Any tears or bad connections between boards must be replaced FIRST

    2. If you have any of these boards, it should be the first board to be replaced
    A) T-Con Board - Video Problems (No Video with standby light on, audio but no video, grainy, distorted, or color problems in screen)
    B) X or Y Buffer Board (Plasma TVs only) - Standby light is on but no power
    C) Backlight Inverter / LED Driver - No Video with standby light on

    3. Main Video Board
    - Standby light is on but no power
    - Either video or audio does not work (if no T-Con in TV. If audio but no video it is T-Con)

    4. Power Board - No power AND standby light does NOT turn on. If standby light is on try other boards above

    5. Panel - No power, distorted picture, lines, slow motion, half screen, faded in / out. Panel problems are usually not worth replacing the panel.

    Check out Tampatec's video below for help with general troubleshooting and diagnosing problems with boards

    Submit Offer
    Price too high? Submit your best offer now! We respond in under 24 hours!
    Email
    Your Price
    qty
    Submit